Production of drip and HDPE tubes

Specifications

 drip tube NOPC

Specifications of drip tube::

  • tube diameter: 16 mm;
  • the number of meters in the Bay - from 100 to 500;
  • drip emitters – compensated (PC) and uncompensated (NO PC);
  • consumption – 1 l/h 1.6 l/h, 2l/h, 4L/h and 8 l/h;
  • dripper distance from 200 – 2000 mm;
  • wall thickness - 0.7 mm (28 mil) to 1.1 mm (44 mil);
  • operating pressure-1 to 4 bar;
  • maximum allowable pressure - up to 6 bar;
  • the material is resistant to UV and temperature changes.
 drip tube

Technical characteristics of the blind tube:

  • tube diameter: 16 mm;
  • the number of meters in the Bay - from 100 to 500;
  • wall thickness from 0.9 mm (35 mil) to 1.2 mm (48 mil);
  • the material is resistant to UV and temperature changes.
Underground drip tube

Specifications of underground drip tube:

  • tube diameter: 16mm;
  • number of meters in the Bay: — from 100 to 500;
  • drip emitters: – compensated (PC);
  • flow rate: – 2 l/h;
  • distance between drippers: – from 200 – 5000 mm;
  • wall thickness: 1,1 mm (44 mil);
  • operating pressure: 1 to 4 bar;
  • maximum allowable pressure: — up to 6 bar;
  • the material is resistant to UV and temperature changes.
Flexible pipe

Flexible pipe specifications:

  • tube diameter - 16 mm;
  • the length of the bays - 30 m;
  • wall thickness 2.4 mm (92 mil);
  • working pressure - from 1 to 10 bar;
  • maximum allowable pressure - 15 bar;
  • the material is resistant to ultraviolet, temperature extremes and fertilizers.
Flexible Knee

Specifications of Flexible Knee:

  • In a standard configuration, rotary corner fittings are installed on both ends - 1/2 "× 3/4", 1/2 "× 1/2", 3/4 "× 3/4";
  • lengths - 15 cm or 30 cm .;
  • nominal pressure -10 bar.